Cypress CH-506RX Spezifikationen PDF herunterladen (Seite 15)

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type “IPCONFIG” To show all IP congurations. To reset the IP,

type “RSTIP” and to use a set static IP, type ”SETIP” (For a full list of

commands, see Section 6.7).

Note: Commands will not be executed unless followed by a carriage

return. Commands are not case-sensitive. If the unit's IP is changed

then the IP Address required for Telnet access will also change

accordingly.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Keine Kommentare

Cypress CH-506RX Spezifikationen Seite 15