Cypress CLUX-H2SDI Spezifikationen PDF herunterladen (Seite 13)

Note

1. Key:



" LED On

"●" LED Off



" LED Flashing

2. Not all of HDMI timings can be converted to SDI, therefore selecting the default EDID

settings provides the HDMI source with output timing reference.

3. EDID switch mode/Default EDID setting:



1080p@60



1080i@60

Update



720p@60

4. Due to the fact that the HDMI default timing is mainly set to 480p, there is a possibility

that the image will not be displayed correctly as that timing is not supported by SDI . To

avoid this, set the HDMI source input output setting to “Automatic” so that the source

equipment will receive the native EDID settings of the display.

5. The EDID update procedure only needs to be done for Nos. 4,8,12,16,20 & 24. (please

refer to “EDID Update button”in section 6.3).

6. When the HDMI input source signal has content that is HDCP encrypted the EDID

Update and Video Lock LEDs will both ash, the other LEDs will not illuminate and no

image will be displayed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Cypress CLUX-H2SDI Spezifikationen Seite 13