Cypress CTM-132 Bedienungsanleitung PDF herunterladen (Seite 12)

WikiPrint - from Polar Technologies

agpspde ip port tm pc pl nl

This command is used to configure Assisted GPS (A-GPS) parameters on supported wireless data cards/modules.

The cellular device chipset contains a GPS receiver. Position Determine Equipment (PDE) assists the cellular device to speed up satellite acquisition, the

PDE sends satellite almanac and ephemeris information to the device.

ip = 0.0.0.0 to 255.255.255.255 IP address for location processing (Default 216.198.139.92)

port = 0 to 65535 Port number for location processing (Default 8889)

tm = 0 Transport mechanism is TCP/IP (Default)

tm = 1 Transport mechanism is Data Burst

pc Position calculation type, fix type

pc = 1 Standalone

pc = 2 MS-based only

pc = 3 MS-assisted only = A-GPS Only (Default)

pc = 4 Optimum speed

pc = 5 Optimum accuracy

pc = 6 Optimum data

pl Privacy level for location processing

pl = 0 Low (Default)

pl = 1 Medium

pl = 2 High

nl Network access level for location processing

nl = 0 Network access only

nl = 1 No network access

nl = 2 Network access with demodulation (Default)

nl = 3 Network access without demodulation

Notes:

• This feature currently works only on later model Sierra Wireless data devices that support A-GPS (USB598, USB597).

• When a later model Sierra Wireless data device is used with a modem configured in half bridge mode, A-GPS support is not available and must be

disabled.

• A-GPS is disabled by cmd agpspde 0.0.0.0 0 0 1 0 1

Examples:

1. Set A-GPS parameters :

cmd agpspde 124.105.114.86 5412 0 3 0 2

1. Disable A-GPS feature :

cmd agpspde 0.0.0.0 0 0 1 0 1

Firmware revision 1.2.2 (rev 1531)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 399 400

Cypress CTM-132 Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern