Cypress CTM-132 Bedienungsanleitung PDF herunterladen (Seite 207)

100

101

WikiPrint - from Polar Technologies

207

modbusadd id [ip|serial]

*This is command is used when CTM200 is being used as a MODBUS Slave Gateway*

id = 1 to 247

MODBUS ID. If ip and serial are blank, then this adds CTM itself as a

slave (only one is permitted)

ip = 1.0.0.0 to 255.255.255.255

Adds a MODBUS TCP Slave (IP address of MODBUS devices connected

to the modem's ethernet port)

serial = Serial A or Serial a Adds a MODBUS Serial Slave using ASCII transmission mode

serial = Serial R or Serial r Adds a MODBUS Serial Slave using RTU transmission mode

Examples:

1. Add TCP slave with ID 1 and IP 192.168.100.122 :

cmd modbusadd 1 192.168.100.122

1. Add itself as a MODBUS slave with ID = 3 :

cmd modbusadd 3

Cypress CTM-132 Bedienungsanleitung Seite 207

Kommentare zu diesen Handbüchern